Truck Details
12' Signature Truck Systems LPG Technicians Service Body for 19,000 GVW Vehicles
1 TON 84" CA, 164" WB |
• Storage boxes conveniently located on one side; 58" H x 48" W x 14" D aluminum inlaid compartment and 36" H x 48" W x 14" D aluminum toolbox • LED Cabinet lights have in-dash switch |
 |
• Rumber® floor • 3 - D-rings flush mounted in the platform floor. Bed is designed to carry (2) 500 WC tanks and trencher |
 |
• 58" H x 48" W x 14" D aluminum inlaid compartment with 2 storage shelves • Center top mounted LED cabinet light • Removable top shelf with one floating hook provided for hanging copper or other items • Spacious lower compartment 24" deep, very suitable for oversized items |
 |
• Heavy duty bulk head with an expanded aluminum rear window • Dual Betts spotlights • Standard grab handle mounted on outside vertical post of bulkhead with two step pull out step |
 |
• 36" H x 48" W x 14" D aluminum toolbox mounted on the platform next to inlaid box • 3 drawer unit with 21 compartments • Center mounted LED cabinet light in swing up door • Two upper shelves for additional items |
 |
• Optional six capacity tool holder for shovel, rake and 8' level |
 |
• Convenient flip down work bench |
 |
• Optional two piece 42" x 10' removable aluminum side rails Other sizes available |
 |
• Large 24 capacity aluminum cement block box mounted below the platform on the opposite side of the crane |
 |
• Optional Thieman Tailgates available (Model TT15ET-60x26+5 with a grated platform shown) |
 |
• Optional boom stow safety |
 |
• Optional front mounted electric winch. Shown in photo is the Ramsey QM 8000 |
 |
 • Optional custom inlaid rear steps with cover used with optional lift gate |
 |
• Optional pull out plastic piping riser storage tray |
 |
 • Optional flush mounted aluminum flip up tank saddles
|
 |
• Optional console box with cup holders and storage trays • Optional rear vision camera |
LINEBACKER Custom Aluminum Platform Body Truck
• 12' long x 96" wide heavy duty Aluminum Linebacker body
with 12" on-center cross members with Rumber® platform deck
• Heavy duty bulk head with an expanded aluminum rear window
• Venturo 6,000 hydraulic crane model # HT40KX
with a 20 foot reach mounted on the street side rear.
Hydraulic extension to 16' and manual to 20'.
• Base radio crane remote control for crane operation
• PTO, PTO pump and hydraulic tank unit
• Manual out 1-side, hydraulic up/down outriggers
• 3 - D-rings flush mounted in the platform floor
• 58" H x 48" W x 14" D aluminum inlaid compartment with 2 storage shelves
• 36" H x 48" W x 14" D aluminum toolbox mounted on the platform
next to inlaid box
• 3 Drawer – 21 Compartment Parts storage system and cabinet lights
• Flip down work bench
• Vertical E-Track on the side rails and bulkhead
• Large capacity aluminum cement block box mounted below
the platform on the curb side
• 4 - Flip style 1075 placards mounted an all four sides of the vehicle
• Shovel/rake holder mounted on the front bulkhead
• 12 volt power lead harness at the rear to operate a tank setting hoist
• Removable Rigid pipe vise and curb side mounted flip down pipe holder
• LED lighting kit with dual work spotlights on the bulk head
• Wheel chock blocks with holder
• Fire extinguisher, bracket and cover mounted on body
• Triangle and first aid kit in cab
• DOT Inspection on chassis
AVAILABLE OPTIONS
• Winch with front and rear mounting hardware
• Shovel/Rake/Level Holder, mounted front of bulk head
• Bulk head mounted J hooks
• Removable aluminum side rails 24"x10'
• Aluminum center console with cup holders and storage trays
• Custom inlaid rear step with cover
• Pull out step and grab handle
• Flush mounted aluminum flip up saddles
• Swivel spot work light
• Pull out plastic piping riser storage tray
• Rear backup color camera
• Hydraulic crane extension from 16 ft. to 20 ft.
• Full hydraulic outriggers with up/down and in/out controls
• Corded crane remote in addition to the radio remote
• Venturo 5000 Hydraulic Crane Model HT30KX with
hydraulic extension to 16', manual to 20'
• Venturo 6000 Hydraulic Crane Model HT40KX
Proportional with hydraulic extension to 20'
• Removable aluminum side rails 42"x10'
• Thieman TT15ET 6026+5 standard lift gate installed
• Thieman TT15ET 6026+5P galvanized bar grate platform
with powder coat construction installed
• Thieman TT16ET 6430+5 galvanized bar grate platform with
powder coat construction installed
• Cab stirrup step
• Pipe carrier rack
• Crane pedestal cover
• Boom stow safeties
• Outrigger stow safeties
• Hydraulic fluid level and temperature monitor
• 5% Kit – 2 - lifting slings, 2 – DOT ratchet tie downs and
2 - lightweight aluminum tank saddles